Bimmercode, coding BMW

PART 1: CODING BMW VEHICLE – FOR STARTER

1. What is BMW diagnostic?

Vehicles diagnostic inspects are known to detect any problems with the transmission system, engine, brake, exhaust, and other parts of vehicles. If you suspect a problem with the airflow, throttle, coolant, and ignition coils, you should run a diagnostic inspection on your cars., your vehicle must be diagnosed, and if there are any problems, they should be resolved as soon as possible to avoid unfortunate accidents.

Now, with your BMW Diagnostics, it makes no difference. BMW diagnostic software scans for problems found in your vehicle’s systems and software. 

What will a genuine BMW diagnostic tool do?

It will identify your vehicle installed control units and the variants, along with the particular device. The vehicle will be inspected, and this process is carried out by scanning for problems and listing them.

What happens next? All diagnostic and service-related data is obtained from the control unit, and a checklist is generated for you. You can then take it to any garage and fix the diagnosed problems with your car.

For your convenience, the BMW diagnostic table lists all the suspected problematic car functions and components according to their priority.

2. What coding BMW for beginner technicians needs to be prepared?

If you want to code your BMW, all you need is:

1 Data Transfer Connection: The latest and most modern tool is ICOM NEXT WIFI: You can refer to the product here :

3. What does BMW Diagnostics provide?

Are you aware that you do not need to visit an agent for diagnosis and that you can run the entire process? You can ask our technicians to perform standard BMW diagnostics for you remotely and provide you with a complete report on what needs to be repaired in your vehicle.

For example, Fault code memory list:

The technician’s BMW diagnosis is the same professional diagnosis you get at the manufacturing, excluding the complexity and soaring prices. That’s not all we can provide with additional incentives for you to have solutions to help your BMW run smoothly and seamlessly. Here you’ll know all about them.

Remove BMW Fault Notification

Are you sick and tired of the BMW fault messages that constantly show up on the screen every time you start the car? Some of these faults may not even be important, but do they continue to appear accidentally and bother you a lot? It even is that the previously resolved issues continue to appear.

Well, we have just the solution for you. With BMW coding, you can permanently remove error messages from your display. 

We can help you eliminate all BMW warning messages like SOS warning, lamp malfunction, rear seat unlocks error, tire pressure error, the false message like camera not working error.

How much time do we need to do that? Almost 30 minutes, and all your fault messages won’t bother you anymore.

However, you need to know that that’s all we have to do to remove the error message – remove the notification. We do not repair or request any faulty modules with this code. All we do is prevent all error messages from appearing on your iDrive and cluster monitor.

NOTE: The technician will not take any responsibility if hiding BMW fault messages cause any potential damage due to unrepaired faults caused by hiding BMW fault messages.

BMW Parts Coding

Did you buy a new part for your car, and it doesn’t seem to work typically? Remember that each new BMW electronics component needs to be coded after adding it to your vehicle, from lights, mirrors to sensors. Try to ignore it, and you will face continuous failures and incorrect operations of your module. Here, we can help you stop it! We will perform a remote cable coding process on any electronic BMW part and make your original or additional module work without any mistakes.

Technical experts will perform remote cable coding on any BMW electronics component to help it operate smoothly. In addition to providing remote cable encryption services for early modules, additionally equipped module encryption services are also offered. The price we offer varies from customer to vehicle. It also depends on the encoding process required and the time needed to encode a particular part. The types of modules that are encrypted can also raise prices a little. Don’t hesitate to get in touch with us for more information.

NOTE: The technician does not take any responsibility for any potential damage resulting from the use of unapproved BMW vehicle parts or if your warranty claim encounters any problems caused by the installed parts kit 

BMW RDC CODING

Coding your BMW isn’t just for your entertainment and comfort. It also encrypts modules that improve the quality and safety of your drives. For example, the BMW RDC control unit monitors tire pressure and warns the driver when it is dangerously low at any point in the driveway. After coding it into your BMW, you will be able to access PSI information directly through the iDrive menu and always ensure that your tires have the correct pressure within a safe range!

4. How to run diagnostics on a BMW?

It depends on whether you want to fully diagnose the ECU or point to your BMW cluster service menu to quickly reset data such as engine oil level or brake oil level. If that’s the first time, leave it to the experts. Unless, of course, you are a professional at reading code lists from your control unit tree.

You won’t have any problems with the second type because reserving your BMW cluster service menu does not require any OBD plugs or external equipment. This process may seem different for each series, but it ultimately always comes with a few clicks on your road meter button.

Reordering your BMW service from the menu on the G-Series looks like this:

1. Park your car in a flat place.
2. I turned on the key, but it didn’t start.
3. Press the start/stop button three times in a row.
4. Press and hold the line meter reset button on the instrument panel until the Services menu appears.
5. To reset it, press and hold the Reset Line Clock button.
6. Press the button again after being prompted to reset.

5. Where do you plug in the BMW diagnostic port?

You can find the OBD port above the car’s pedals or just below the dashboard to the left. In F and G series, the OBD gate can be located several inches away.

What you need to run diagnostics:

• A solid Internet connection
• Laptops
• Time: 30-60 minutes
• BMW ICOM NEXT Encryption Cable

6. Other remote BMW services

Here, we provide you with not only diagnostic services. We offer you a remote coding BMW service that saves you time and money at manufacturing:

Key Fob Activation: If you’re using a used BMW, you don’t know how many fobs the previous user turned on. This is why we need to cancel BMW lock activation through remote cable encryption sessions with our technician. You don’t have to go to the dealership to spend too much time and money when our technicians provide you with an encryption session to unlock your remote control key while sitting at home. If you lose your BMW key, you can go through the same process and find a way to replace your BMW key for your safety. The encryption process of BMW’s activation cancellation takes less than 30 minutes, all of which take place comfortably at your home.

BMW Battery Registration: When purchasing and replacing a new BMW battery, it is necessary to complete the BMW battery registration process to maintain the life and durability of your car. Our technicians will provide you with a BMW battery coding process that will help you adjust your vehicle to the new battery specifications to extend your vehicle’s battery life.

Disable Start Stop: Many people find the automatic start-stop function disturbing, especially when traffic is blocked. Encrypting our Start-Stop button will be a long-term solution to your Start-Stop button if it bothers you. With the code provided by our technicians, it will permanently turn off the automatic engine shutdown function by programming your vehicle to keep and retain the most current settings (of which features have been disabled). This way, when you stop the car completely, your car will not automatically turn off the engine as usual. Learn more about the auto stop feature in our blog post.

BMW Sport+: If you crave a more substantial ride, the Sport+ encoder will give you the thrill of driving a BMW. It provides you with the ability to control the reduced viscosity, faster gear shift, and improved gas response. Moreover, it is simply a great choice if you want to show the full potential of your BMW.

AUTOTECHVN

AUTOTECHPART